Pond Pumps

We appreciate that it may be confusing to select the appropriate pump for your particular job and would always recommend those requiring assistance to pop in and discuss their requirements on a personal basis.

Please bring as much relevant information as possible, i.e. size of pond, waterfall height, width and length, fountain height and diameter, filter type, etc.

Fountain and Waterfall Pumps

Bermuda Fountain Pump

These submersible (in pond) pumps are normally supplied with an extending T- piece, which allows various fountainheads to be fitted to the vertical section, and hose of various diameters to be fitted to the stepped side branch. Valves allow the water flow to be balanced between the fountainhead and the side branch, from which the hose may be run through the appropriate filter/U.V. and returned via a waterfall or pond side ornament.

Oase Eco Filter Pump

These pumps generally have fine strainers or foams fitted to prevent the fountainhead from becoming blocked with pond debris. Extra pre-filters may be fitted which raise the pump above the bottom of the pond reducing the sediment intake to the pump.

Feature Pumps

These are small, compact submersible pumps used in water features, pebble ponds or fountain ornaments. Due to their compact nature they must be sized correctly to ensure the pump has an adequate lift capacity for the job in hand. The maximum capacity of the pump is the flow of water unrestricted from its outlet, when a hose is attached and held vertically this capacity is reduced, so choose carefully.

Bermuda Water Feature Pump